A Quick Guide to Using the eLeaf iJust 3 3000mAh Kit w/ Duro PMMA Tank

The eLeaf iJust 3 3000mAh Kit w/ Duro PMMA Tank is the perfect middle ground between highly advanced, powerful sub-ohm kits and portable, all-in-one vaping systems. This pen mod setup allows you to enjoy your big clouds and freebase nic flavors while remaining conveniently portable, low-maintenance and easy to operate.

If you’re ready to try out this new setup, you’re going to want to read this guide first. We’ve created a step-by-step tutorial to getting the most out of this stunning, high-quality vaping system, from the second you take it out of the box to the moment you press that firing button to enjoy your first delicious hit of thick, luscious vapor.

Step #1: In the box, you’ll find the iJust 3 device, the Duro PMMA Tank, two coils, a user guide, spare parts and a microUSB cable. Leave the spare parts and the guide in the box, saving them for a later time. Choose the coil that you’d like to use based on your preferred resistance level.

Step #2: Charge your device. The battery is built into the mod, which means that you’ll need to charge the entire device by locating the charging port. The light will turn green on the device when it reaches a full charge.

Step #3: While the iJust 3 is charging, you can set up your tank. The Duro PMMA Tank can be used with either coil that comes with the kit. Prime the coil first, making sure that it’s evenly saturated with e-liquid. Then, install it directly into the tank. Now, you can fill the tank with the freebase nic vape juice of your choice. The tank can hold a maximum of two milliliters of e-liquid.

Step #4: Now, you can connect the tank to your fully charged device. The pieces connect via a 510-threaded connection, so simply screw the tank securely onto the mod.

Step #5: Turn on the device. Adjust the airflow ring of your tank as needed.

Final Step: Press the firing button to enjoy your first hit. The iJust 3 Kit adjusts the wattage according to the state of your battery, so there’s no need to make any output adjustments.

As you can see, the eLeaf iJust 3 3000mAh Kit w/ Duro PMMA Tank is a stunning vaping system that’s powerful, reliable, aesthetically pleasing and conveniently portable. To get as much vaping satisfaction out of this kit as possible, follow our guide to know how to use it properly.