THE IDEAL BEGINNER MOD: ELEAF ISTICK 20W KIT

The ELEAF ISTICK 20W KIT contains a reliable battery with a fashionable metallic appearance. With a compact size, you can hold the MOD in the palm of your hand. This makes it more convenient for usage and portability.

When you’re new to the world of MODs, you need to start somewhere. That means you need to look for a MOD that is easy to hold and use, and has a low wattage setting. This is to avoid getting too strong of a throat hit. This sleek and compact box MOD, which can go up to 20W, while using a 2200mAh battery, won’t only last you the entire day, it is basically what you have been looking for!

The iStick 20W features 2 modes: VV and VW, which can be easily modified by pressing the square button for three times to switch the VV/VW mode when the battery is turned on. This control of the voltage or wattage settings comes from the “UP” and “DOWN” arrows beneath the firing button. To turn it ON/OFF, the battery MOD can be turned on or by 5 consecutive clicks.

Overall, this kit is simple to operate (though it’ll take a bit of time at first to get used to it if you are brand new to this MOD version or MODs in general), thus making it an approved option for new and middle level vapers and modders that are searching for uncomplicated command of voltage and/or wattage. All the while, the iStick 20W still packs the power and precision that sophisticated vapers are looking for in a box MOD.

Purchase the iStick Bending Adapter Available HERE.
Details and Specs:

• Size of battery MOD: 75mm*21mm*32.8mm
• Color: black, silver, red, blue
• Capacity: 2200mAh
• Thread Type: 510 Thread
• Variable voltage: 3.0V - 5.5V
• Variable wattage: 2.0W - 20W

The ELEAF ISTICK 20W KIT Includes:

• 1 x iStick battery
• 1 x eGo adapter
• 1 x Manual
• 1 x USB Charger

Detailed Introduction: OLED screen with delicately set buttons, micro-USB port on bottom

Additional Features and Details:
* OLED screen
* 2200mAh large capacity
* 20w strong output wattage
* Adjustable voltage
* High Stability: The output wattage is in high stability. It can also be up to the high output wattage even in the case of low power.

** Is not a sub ohm device.

**Must use 1.0ohm or higher coil