Site Information

FDA Warning: Statements about this product have not been evaluated by the FDA. Not intended to diagnose, treat, or cure any disease.
 Loading... Please wait...

Step-by-Step Guide to Using the Aspire PockeX Pocket AIO

Posted on

Aspire has never failed to find a whole new way to impress even the most experienced vapers out there, especially now with their amazing PockeX Pocket AIO System. This all-in-one vaping system takes technology and overall performance to the next level.

Aspire’s PockeX Pocket AIO is a fashionable all-in-one style device with 1500mAh battery capacity and 2ml e-juice capacity. Applied with 0.6ohm SS Nautilus X U-Tech coil, wider drip-tip and larger top-airflow, PockeX AIO brings superb flavor and dense vapor production. Top filling, leak proof design, and mini-sized makes the PockeX a portable and daily using vaping device.

So, if you’re ready to use this exciting piece of vape hardware, allow us to make your life easier with a simple guide. That way, you can be enjoying its unique features in no time.

Step #1: Remove all of the components from the box. The first thing that you’ll need to do is charge your device by using the included Micro-USB Cable and plugging it into your device, along with a power source. The LED light on the device will turn green once it has reached a full charge.

Step #2: While your PockeX Pocket AIO device is charging, you can prepare your atomizer. It comes pre-installed with the 0.6ohm SS316L, which will need to be primed. Fill your tank with the desired vape juice and wait about 5 minutes for the liquid to saturate the coil. This atty fills through the top, and you’ll need to make sure that it’s fully closed before you attempt to vape.

Step #3: Now, you can attach the tank to the device. You may also wish to make adjustments to the airflow using the airflow dial on the bottom of the tank. The entire device is operated by a single button, and your user manual will tell you how to activate different features using the button. Of course, you’ll need to use it to turn your device on, but also to set your wattage level to up to 23 watts.

Final Step: With your device set at the ideal wattage level, you can now hold down the same button to fire a hit. If needed, you can make more adjustments to the airflow and output until you’re satisfied.

Even though the PockeX Pocket AIO System is highly user-friendly, you gotta know how to get as much vaping enjoyment out of this device as possible by following the proper steps to setting it up and using it initially. Now, all you need to do is savor some fantastic vapes with your favorite The Vape Mall e-liquids.

comments powered by Disqus